Making of the LED lights

These LEDS need to be created so I can create my new space. 

You need a scalpel, electrical tape, LED and a battery. 

The first step is to cut some strips of electrical tape. This will be used to attach the battery to the LED.

The second step is you need to test that the battery and LED will work, the shortest leg of the LED attaches to the + side of the battery and the longest leg attaches to the - side of the battery. If you push the legs down so they are in contact with battery the light should come on. 

 The third step is to tape the battery and the legs of the LED into position, this will keep the light on. If you do need to turn the light off you just need to pull one leg out from the battery. 

These are all of the LED lights that I have assembled so far. I will use these in the first space I create.